Blog/Bubble Tea Shop Packaging: Cups, Lids, Straws and Extras

Bubble Tea Shop Packaging: Cups, Lids, Straws and Extras

On this page 6 sections
  1. 1. Choose the cup
  2. 2. Match the lid to the cup
  3. 3. Choose the straw
  4. 4. Inserts and toppings
  5. 5. Carrying multiple drinks
  6. A simple starter list
Clear PET Dome Lid with Die-Cut Hole – Fits U Cups (Carton of 1000)

Bubble tea, smoothies and iced drinks put more demands on packaging than a standard cold drink. The straw has to be wide enough for pearls or fruit, the lid has to suit that straw, and the cup has to be the right size for your recipe. This guide covers each part and what to check before you order.

Every product named below is a current Packery catalogue item. Each product page shows the size and the quantity in the carton or pack.

1. Choose the cup

Clear PET cups show off layered drinks and toppings. The range includes:

  • PET U-shaped cups in 7.5oz (225ml), 10oz (300ml), 12oz (360ml) and 16oz (480ml). U-shaped cups have a rounded base.
  • Straight PET cold drink cups in 6oz, 8oz, 10oz, 12oz, 14oz, 16oz, 20oz and 23oz.
  • A 425ml PET cup listed as "Weights and Measures Approved".

Paper cold cups suit drinks that do not need to be seen, in 12oz, 16oz, 20oz, 22oz and 24oz.

How to pick a size: make your standard drink, including ice and toppings, and measure the total volume. Choose the cup that holds it with a little space under the lid. If you sell regular and large sizes, check that both sizes take the same lid. That keeps your lid stock simple.

Products in this guide

Sold by the carton or pack · price per item shownAll cold cups →

2. Match the lid to the cup

Cold cup lids are listed by the cup or rim size they fit. Order the lid that names your cup:

  • For U-shaped cups: clear PET flat lids (with an X slot or no hole) and dome lids (with a die-cut hole or no hole), each listed as "Fits U Cups", such as the Clear PET Dome Lid with Die-Cut Hole – Fits U Cups.
  • For 98mm cups: PET flat lids with an X slot, dome lids with a die-cut hole, dome lids with a 55mm large hole, and a straw-free lid.
  • For 90mm cups: PET flat lids with an X slot, a 90mm dome lid with hole made for the 425ml PET cup, and a straw-free lid.
  • For 78mm cups: flat and dome lids made for 6oz and 8oz cups.

Dome or flat? A dome lid leaves room for cream, foam or toppings above the rim. A flat lid suits drinks filled to below the rim. A large-hole dome lid is made for wide straws and thick drinks.

No-straw service: straw-free lids are available in 90mm and 98mm for drinks sipped from the lid.

3. Choose the straw

Pearls, jelly and fruit need a wide straw. The range includes:

Check the fit: put the straw through the lid you plan to use before you order a full carton. The straw should pass through the X slot or hole without tearing the lid, and a slant-cut end makes it easier to pierce.

4. Inserts and toppings

  • PET insert trays (5oz) sit inside the top of the cup to keep toppings or a dessert layer separate. There is one made for 98mm cups and one made for 95mm U cups.
  • Spoons: wooden ice-cream spoons or gelato spade spoons for drinks served with a topping to eat.

5. Carrying multiple drinks

  • Cup holders: 2-cup and 4-cup egg board carry trays and a 4-cell corrugated holder, for orders of two or more drinks. Check the holder suits your cup size.
  • Bags suit larger orders and orders with food.
  • Napkins for every order.

A simple starter list

For a small bubble tea menu with two sizes:

1. Two cup sizes that take the same lid. For example, the PET U-shaped cups in 7.5oz, 10oz, 12oz and 16oz all take the lids listed as "Fits U Cups"; check each cup page to confirm the fit before you order.

2. One dome lid with a hole and one flat lid for those cups.

3. One wide bubble tea straw, plus a regular straw for drinks without pearls.

4. Cup holders, bags and napkins.

Start with a pack or a small quantity of any new size, check the cup, lid and straw together, then order by the carton once you are happy with the fit.

Questions about matching cups and lids? Call Team Packery on 0426 486 419 or browse the range at packery.com.au.

Setting up or restocking your packaging?

Send us your list for a trade quote, or price it yourself in the cost calculator.

Delivery to metro, regional and remote & NT areas (not Tasmania) · damaged items replaced free · Delivery details

Related guides

Ready to order?